spd device
"
جهاز SPD من مرحلة واحدة TUV CE 275V 320V 385V 440V 20KA 40KA T2 لأنظمة إمدادات الطاقة
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
حماية البرق للمنزل بالكامل، مانع اندفاع الجهد المنخفض 220 فولت 320 فولت 20 كيلو أمبير 40 كيلو أمبير 80 كيلو أمبير SPD تيار متردد
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
T2 T3 جهاز الحماية من الضربة البرقية 3 مرحلة AC SPD 220V 20kA 40kA
Product features ● Full mode protection ● No leakage current, no afterflow ● Large flow capacity and super low residual pressure ● Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection devices in three-phase power supply systems. Product Specification Standards IEC 61643.11 SPD type T2,T3 Models SLV-40T SLV-80T Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
الجهاز الكامل لـ SPD 40A 15μH DIN Rail T1 T2 التنسيق الحماية الصناعية
LTS-40A/LTS-63A Decoupling Coil Crafted with high-quality copper wire winding and a broadband magnetic core, this decoupling device is engineered for scenarios where the cable decoupling distance between two levels of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is insufficient. It acts as a key component in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Product features ●Made
الصناعية كاملة المنزل الحماية من التموجات العازل 40A 15μH DIN السكة الحديدية SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
الإضاءة الخارجيّة تحت تأثير الكهرباء SPD 220V 5kA 10kA AC DC جهاز حماية من التموج IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
مكشوف الحماية الكهربائية 40A 15μH DIN Rail T1 T2 SPD التنسيق الحماية الصناعية
LTS-40A/LTS-63A Decoupling Device is designed for scenarios where the decoupling distance between two levels of surge protectors (T1-T2, T2-T2, T2-T3) is insufficient. It plays a key role in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Crafted with high-quality QA copper wire winding and a broadband magnetic core, the product synchronizes with lightning frequency to avoid magnetic
جهاز حماية الطفرات الكاملة CE TUV جهاز حماية الطفرات 4P 275V واحد مرحلة T2 SPD
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.25kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
حماية من زيادة التيار للمنزل T1 T2 نوع واقي زيادة التيار ثلاثي الأطوار AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
