surge protective device
"
Lightning Surge Protection Network SPD 110V 160V 5kA 10kA Type 2 3 SPD
Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,
Gigabit Poe Surge Protector RJ45 10Gbps POE 5V 8V 48V 60V Communication Network Lightning Protector
Product Features Modular design, metal casing, strong anti-interference ability. DIN 35mm rail, easy for expansion. Unique anti-interference circuit design, born for 10G communication network. Parallel protection circuit design, single-stage/ high-energy/ low residual voltage. Cat-6A surge protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 10G/10G BASE-T 802.3 computer network information systems Product Specification Parameter
Single Phase TUV CE SPD Device 275V 320V 385V 440V 20KA 40KA T2 For Power Supply Systems
About this item High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20s), residual voltage 2.2kV, effectively protects against lightning and overvoltage. Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm wiring, with visual status window and remote signaling for convenient monitoring. Product
Home Network Surge Protector Type 2 3 SPD 24V 32V 2kA 3kA For AC DC Surge Suppressor Device
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features Two ports, full mode protection Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
2 Wire Control Signal SPD 5Vdc 10kV PLC Sensor Industrial Analog Loop Protection
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Whole Home Lightning Protection Low Voltage Surge Suppressor 220V 320V 20kA 40kA 80kA AC SPD
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Network SPD 5V 12V 24V 48V 2 Wire Line GND 5Vdc 10kV Industrial Control PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
Whole House Surge Suppression 220V 10kA 25kA Low Residual Voltage Protection Device
SLV-10S/SLV-20S is a compact ultra-low residual voltage surge protector designed for single-phase power supply systems, ideal for fine lightning protection in LPZ 1-2 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths.With nominal discharge current of 10kA (SLV-10S) and 20kA (SLV-20S), this SPD efficiently
Industrial Whole House Surge Protector Decoupler 40A 15μH DIN Rail SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
