lightning arrester box
"
Overspanningsbeschermingsapparaat. Driefasige overspanningsarrest voor commerciële gebouwen.
Product Description 4-pole Type 2 SPD fits three-phase power distribution systems in commercial buildings, mounted on floor secondary panels within LPZ0B-LPZ1 zones to shield lighting, air conditioning, CCTV and office electronics from induced lightning surges and grid voltage fluctuations. Multiple Uc ratings (275/320/385/440Vac) match global commercial mains standards. Pluggable modules simplify property maintenance replacement, V0 flame retardant housing mitigates cabinet
Bliksembeveiliging T1 T2 SPD 3-fasen Huishoudelijke Overspanningsbeveiliger 220V 25kA 40kA 80kA
LPM 25B-385/4/LPM 50B-385/4 is a T1+T2 level power surge protector. It integrates primary (T1) and secondary (T2) protection, providing comprehensive shielding against direct and indirect lightning strikes. Product features • Integrated module design:Integrated module design enables hot-swappable replacement, accurate surge protection, and cost-effective maintenance. • Support Kevin Connection:Featuring an integrated module design, ensuring accurate current measurement and
Overspanningsarrestator 3 fase 220V 385V 40kA 80kA Home Blikstrengbescherming
The LPM 80-385/4 is a Type T2 three-phase surge protective device (SPD) engineered to defend three-phase AC power distribution systems from lightning-induced surges and transient overvoltages. Built for installation in LPZ 0B+ and subsequent lightning protection zones, this unit delivers robust, reliable protection for both commercial and industrial infrastructure. Product features ● The module is designed to be pluggable and anti vibration. ● Built in ultra-low temperature
Windpark bliksemgebeurtenisrecorder, batterij met lange levensduur IP67-toren LPS-piekmeter
Lightning event recorder engineered for wind turbine and solar farm outdoor LPS, IEC 62561-6 compliant, mountable on tower down conductors and field flat copper earthing bars. Dual self-powered lithium batteries deliver 8–10 years service life, allowing long-term monitoring on high tower sections without power outlets. IP67 dust & water resistance suits coastal and mountain sites with large day-night temperature swings, operating stably -20℃ to +80℃. Wide 500A–100kA range
Overspanningsbeveiliging | Driefasige SPD om bliksemschade aan elektrische apparatuur te voorkomen
Product Description Induced lightning surges and grid switching transients often burn industrial mainboards, inverters and building low-voltage hardware. This 4-pole three-phase SPD acts as secondary protection in LPZ0B-LPZ1 cabinets, conducting and diverting surge currents within 25ns to clamp residual voltage to safe ranges and reduce overvoltage breakdown risks for downstream electronics. 40kA maximum discharge capacity withstands repeated heavy lightning impulses; anti
Buitenstraatverlichting LED SPD Overspanningsbeveiliging IP67 T2 T3 220V 320V 10kA 20kA
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense for line-neutral, line-earth, and neutral-earth circuits. Boasting an ultra-compact footprint (42mm×30mm×23mm) and hassle-free installation, it is perfectly suited for space
Overspanningsbeschermingsapparaat.
Product Description Type 2 surge protective device exclusively designed for 440Vac high-voltage three-phase distribution systems, installed in heavy-duty industrial control cabinets and large commercial secondary panels within LPZ0B-LPZ1 zones. It diverts lightning and grid switching surges with voltage protection level ≤ 2.0kV to safeguard large inverters and power control cabinets. 4-pole full L1/L2/L3/N-E circuit protection with 40kA maximum discharge capacity handles
Overspanningsbeschermingsapparaat. Driefasige overspanningsarrestator met afstandssignaleringscontakten.
Product Description Conventional SPDs without remote contacts rely entirely on manual inspection; degraded failed modules operate undetected and leave downstream equipment unprotected. This 4-pole surge protection device integrates NC/NO switching remote contacts to send automatic switch alarm signals to automation monitoring platforms upon SPD failure, paired with front visual status window for on-site check, delivering dual local & remote monitoring. With 40kA surge
Outdoor Led Verlichting Spd 220V 5kA 10kA AC DC Overspanningsbeveiliging IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
