lightning arrester wire
"
Προστασία από υπερτάσεις Σπίτι T1 T2 Τύπος Τρίτης Φάσης Προστασία από υπερτάσεις AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
Προστατευτικό Υπέρτασης Οικιακής Χρήσης AC DC Δικτύου SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
Προστατευτής υπερβολικής πίεσης για το σιδηροδρομικό δίκτυο τύπου 2 3 SPD 24V 32V 2kA 3kA Για συσκευή καταστολής υπερβολικής πίεσης AC DC
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Προστατευτικό Υπέρτασης Δικτύου SPD 48V 60V 5kA 10kA Τύπου 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Ολόκληρη η οικία καταστολή υπερτάσεων 220V 10kA 25kA χαμηλή υπολειμματική τάση προστασία συσκευή
SLV-10S/SLV-20S is a compact ultra-low residual voltage surge protector designed for single-phase power supply systems, ideal for fine lightning protection in LPZ 1-2 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths.With nominal discharge current of 10kA (SLV-10S) and 20kA (SLV-20S), this SPD efficiently
Τ2 Τ3 Συνδυασμένη διάταξη προστασίας από υπερτάσεις Τρίτης Φάσης 20KA 40KA SPD
Dual-function combined SPD integrating Type 2 high-current diversion and Type 3 precise voltage clamping, installed at LPZ1-LPZ2 terminal zones and coordinated with front Type 1 arresters for staged surge suppression. 25ns nanosecond phase response instantly blocks grid switching voltage spikes, two Uc variants match regional impulse withstand requirements. Vibration-resistant modular build reduces loose contact risks on production lines, standardized 5N·m torque enables
Συσκευή προστασίας από υπερτάσεις τελικού επιπέδου Spd 12Vdc 2kA 3kA T2 T3 Συσκευή ακριβείας ευαίσθητης ηλεκτρονικής
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
Μηχανή προστασίας από υπερβολική τάση χαμηλής υπολειμματικής τάσης Τρίτης φάσης 20KA 40KA 35mm Standard DIN Rail
This 3+NPE three-phase surge arrester is designed for LPZ1-LPZ2 terminal lightning zones with patented GMR ultra-low residual voltage technology to clamp switching and lightning transients quickly. Full L1/L2/L3-N plus independent N-E discharge circuits deliver ≤25ns L-N response time, the 320Vac variant achieves residual voltage as low as 1.0kV to mitigate calibration drift on PLCs, sensors and CNC controllers. Vibration-resistant pluggable modules integrate green/red visual
Ηλεκτρική συσκευή προστασίας από υπερβολική πίεση T2 T3 220V 5kA 10kA
SLV 220-10/SLV 220-20 is a compact final-level surge protector designed for AC power supply systems. As a series-installed fine arrester at the front end of final-level equipment, it provides targeted protection for sensitive electronics and precision equipment. Product features ● Full mode protection ● Large flow capacity and super low residual pressure ● No leakage current, no afterflow ● Suitable for LPZ 2-3 and subsequent lightning protection zones, used for lightning
