lightning arrester box
"
Tiga Fase T2 SPD Home Surge Protector CE TUV 4P 320V 20KA 40KA
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Peredam Lonjakan Jaringan Rumah Tipe 2 3 SPD 24V 32V 2kA 3kA Untuk Perangkat Peredam Lonjakan AC DC
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Jaringan Listrik Surge Protector SPD 48V 60V 5kA 10kA Tipe 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Pelindung Lonjakan Arus Rumah T1 T2 Tipe Tiga Fase Pelindung Lonjakan Arus AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
Perangkat Perlindungan Tambahan Tingkat Akhir Spd 12Vdc 2kA 3kA T2 T3 Perangkat Presisi Elektronik Sensitif
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
Perangkat Pelindung Lonjakan Sinyal Kontrol 2 Kabel SPD 5Vdc 10kV Sensor PLC Perlindungan Loop Analog Industri
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Seluruh Rumah Sinyal Surge Perlindungan Perangkat 2 Wire Line Line 5Vdc 10kV PLC Control Industrial
LS-CS5L Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN Rail
Pelindung Lonjakan Seluruh Rumah Jalur Sinyal SPD 5V 12V 24V 48V 2 Kabel GND PLC Kontrol Analog
LS-CSE Series 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN
Perangkat Pelindung Lonjakan Sinyal Industri 5V 12V 24V 48V Jalur 2 Kawat Jalur 10kV Kontrol PLC
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
