surge protection device
"
Perangkat Perlindungan Lonjakan | SPD Tiga Fase Untuk Alat Ukur Presisi Laboratorium
Product Description Laboratory precision measuring instruments are highly sensitive to voltage fluctuations and lightning surges; transient high voltage causes sensor calibration drift and permanent circuit damage. This 4-pole Type 2 SPD is installed on lab three-phase incoming distribution panels. The low voltage variant delivers residual voltage as low as ≤ 1.25kV with ≤ 25ns nanosecond-level response to divert surge currents and contain impulse voltage within instrument
Seluruh Rumah Suppressor Tambahan CE TUV Perlindungan Tambahan Perangkat 4P 275V Single Phase T2 SPD
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.25kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Perangkat Perlindungan Tambahan Voltage Rating Tiga Fase Tipe 2 SPD Untuk Global Grids utama
Product Description Three-phase mains continuous operating voltage varies across global regions, making single-rating SPDs incompatible with all international distribution projects. This series 4-pole Type 2 surge arrester offers four Uc voltage options covering mainstream 275~440Vac three-phase grid standards, with consistent form factor, mechanical structure, surge capacity and monitoring functions across all variants to simplify standardized panel design and project
Perangkat Perlindungan Lonjakan | Kisaran Suhu Luas Tiga Fasa SPD Untuk Lemari Industri Dalam Ruangan
Product Description Conventional SPDs suffer false tripping and performance degradation in cold workshops or sealed high-temperature cabinets. This 4-pole Type 2 surge arrester maintains consistent performance from -40 ℃ to +70 ℃ , equipped with dedicated low-temperature thermal release to avoid unnecessary disconnection under extreme cold. 40kA surge capacity and ≤ 25ns response time remain consistent regardless of ambient temperature shifts, with stable residual voltage
Perangkat Perlindungan Tambahan. Plug-in Modular Tiga Fase SPD Untuk Perbaikan Mudah
Product Description Integrated non-detachable SPDs require full removal and complete rewiring upon failure, increasing maintenance time and loose wiring risks. This SPD adopts split base + independent pluggable module structure: when one module degrades, only the faulty unit needs extraction and replacement with all base, phase and PE wiring untouched to cut on-site wiring labor. Anti-loose locking buckles resist long-term cabinet vibration, while each single module
Perangkat Perlindungan Lonjakan | SPD Industri Tiga Fase Tipe 2 Untuk Panel Otomasi
Product Description Industrial-grade Type 2 SPD fits 385Vac three-phase factory distribution cabinets for LPZ0B-LPZ1 zones, delivering surge protection for factory automation, EV charger auxiliary power and lab precision instruments. It carries 20kA nominal discharge current and 40kA maximum surge capacity with ≤ 25ns response time to clamp transient high voltage instantly. Pluggable modules simplify maintenance replacement, anti-vibration construction withstands production
Perangkat Pelindung Lonjakan Arus LED Luar Ruangan 220V 320V 10kA 20kA IP67 T2 T3 SPD
The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained
Peralatan Perlindungan T2 T3 220V 5kA 10kA Untuk Perlindungan Instrumen
SLV 220-10/SLV 220-20 is a compact final-level surge protector designed for AC power supply systems. As a series-installed fine arrester at the front end of final-level equipment, it provides targeted protection for sensitive electronics and precision equipment. Product features ● Full mode protection ● Large flow capacity and super low residual pressure ● No leakage current, no afterflow ● Suitable for LPZ 2-3 and subsequent lightning protection zones, used for lightning
Perangkat Perlindungan Surge Nylon Spds LED SPD 220V 5kA 10kA IP67 Perlindungan Petir Luar
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
