signal lightning arrester
"
3相 T2 SPD ホーム 超電圧保護 CE TUV 4P 320V 20KA 40KA
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
超電圧保護家 T1 T2 タイプ 3 段階超電圧保護器 AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
AC DC 全家庭電圧保護ネットワーク SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
家庭用ネットワーク電圧電圧保護具タイプ2 3 SPD 24V 32V 2kA 3kA AC DC電圧抑制装置用
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
ネットワーク電気電圧保護装置 SPD 48V 60V 5kA 10kA 2型 3型 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
ネットワークSPD 5V 12V 24V 48V 2線式ラインGND 5Vdc 10kV産業用制御PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
オフィス・ホームカメラ用LANケーブルサージプロテクター 100M Cat5 4kV
SX-100M/SX-100M/POE is a cost-effective RJ45 network signal surge protector designed for 100 BASE-T computer network information systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides reliable surge protection for low-speed Ethernet networks, ensuring stable data transmission in industrial, commercial, and residential environments.Featuring an independent metal body with strong anti-interference ability, the product minimizes
内務省 T1 T2 SPD 単相電圧保護 220V 15kA 30kA
LPM H12.5M-280/1+NPE is a T1+T2 level power surge protection device.It adopts a mixed-technology design (MOV for L-N, GDT for N-E) to provide comprehensive protection against direct and indirect lightning strikes. Featuring module pluggable and anti-vibration design, the product is easy to maintain and replace, making it suitable for industrial and commercial environments. The built-in ultra-low temperature release mechanism ensures safe operation in extreme temperatures.
3相全屋電圧保護装置 220V 40kA 50KA 80kA 100KA DINレール
LPM 40-385/4 Series is a T2 level power surge protector designed for three-phase power supply systems. It is specifically tailored for industrial and commercial power systems, providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Equipped with indication windows and remote signaling contacts ●
