t2 dc spd
"
최종 수준의 전압 보호 장치 Spd 12Vdc 2kA 3kA T2 T3 민감한 전자 정밀 장치
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
옥외 LED 서지 보호 장치 220V 320V 10kA 20kA IP67 T2 T3 SPD
The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained
가정용 전기 SPD 서지 보호 장치 T2 T3 220V 5kA 10kA 기기 보호용
SLV 220-10/SLV 220-20 is a compact final-level surge protector designed for AC power supply systems. As a series-installed fine arrester at the front end of final-level equipment, it provides targeted protection for sensitive electronics and precision equipment. Product features ● Full mode protection ● Large flow capacity and super low residual pressure ● No leakage current, no afterflow ● Suitable for LPZ 2-3 and subsequent lightning protection zones, used for lightning
풍력 재생 에너지 T2 SPD 690V 40kA 80kA 산업용 고전압 보호
LPM 40-760/4/LPM 50-760/4 is a T2 level power surge protector specifically designed for wind power generation systems. It is engineered to withstand the high-voltage requirements of wind power systems (690Vac nominal voltage), providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product Features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Equipped with
DC 서지 보호기 300V 500V 1000V 1500V T2 PV 패널 신재생 에너지 보호
LPM PD Series is a T2 level power DC surge protector designed for low to medium-voltage photovoltaic (PV) power generation systems. Product FeaturesFault resistant Y-type circuit design Integrated with an arc extinguishing baffle, it prevents fire hazards caused by internal arcs, improving system safety.Double pluggable and anti-vibration designThe hot-swappable module can be replaced without power interruption, with anti-vibration structure ensuring stable operation in
야외 T2 T3 초상압 보호 장치 LED 스트리트 라이트 Spd 220V 5kA 10kA AC DC IP67
Product Features ● Single-port full-mode surge protection: Safeguards all line paths (L-N, L-E, N-E) against transient overvoltages. ● Ultra-compact & tool-free installation: Miniature dimensions (42mm×30mm×23mm) enable quick parallel mounting at equipment front ends. ● IP67 environmental protection: Dust-tight and waterproof enclosure ensures stable performance in harsh outdoor conditions. ● LPZ 2-3 zone compatibility: Designed for installation in LPZ 2-3 and subsequent
야외 LED 조명 Spd 220V 5kA 10kA AC DC 전압 보호 장치 IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
야외 거리 조명 Led Spd 서저 보호기 IP67 T2 T3 220V 320V 10kA 20kA
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense for line-neutral, line-earth, and neutral-earth circuits. Boasting an ultra-compact footprint (42mm×30mm×23mm) and hassle-free installation, it is perfectly suited for space
AC DC 온 홈 서저 보호 네트워크 SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
