lightning surge protection box
"
Całokształtny urządzenie zabezpieczające przed przesunięciem sygnału 2 przewody przewodowe 5Vdc 10kV PLC Control Industrial
LS-CS5L Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN Rail
System ochrony przeciwprzepięciowej całego domu TUV CE SPD 275V 320V 385V 440V 20KA 40KA T2
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Urządzenie do ochrony przemysłowej 5V 12V 24V 48V 2 Wire Line Line 10kV PLC Control
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
Ochronnik przeciwprzepięciowy POE Ethernet 8-portowy do montażu na ścianie 1G do biura/domu
Product Features ● Integrated multi-channel independent protection circuit, small mutual interference. ● Unique anti-interference wiring design, meet 1G network communication. ● Single-stage high-energy device parallel protection circuit design, low residual voltage. ● Cat-6 type line lightning protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 1000/1000 BASE-T 802.3 computer network information systems. Product Specification Standards IEC
Urządzenie przeciwprzepięciowe | Trójfazowy SPD zasilania 275 V AC typu 2
Product Description This 4-pole AC power surge arrester fits LPZ0B to LPZ1 lightning protection zones and indoor three-phase low-voltage distribution cabinets. It diverts lightning surges and grid switching transients, clamping residual voltage ≤ 1.25kV to protect PLCs, control panels and precision electronic equipment. The pluggable anti-vibration module comes with built-in ultra-low temperature thermal release, visual deterioration indicator and NC/NO remote signalling
Urządzenie przeciwprzepięciowe typu 2, 3 fazy, 220V, 385V, 40kA, 80kA do rozdzielnicy elektrycznej
About this item 1.【385V AC High-Capacity Surge Protection】 Provides reliable protection against power surges and lightning-induced over-voltages in standard AC electrical systems. Features a 385V AC operating voltage and a 80 kA discharge capacity to safeguard connected equipment2.【4P(3+NPE) Configuration for Complete Three-Phase Safety】 The 3P+N design provides independent protection for both the live and neutral conductors in a three-phase system. This comprehensive
Urządzenie przeciwprzepięciowe | Trójfazowy SPD do PLC i przemysłowych paneli sterowania
Product Description 4-pole Type 2 SPD engineered for three-phase industrial automation cabinets, installed in LPZ0B-LPZ1 secondary lightning zones to protect PLCs, inverters and servo systems from lightning surges and grid switching transient overvoltage. Full L1/L2/L3-N-E circuit diverts surge currents with ≤ 25ns fast response to clamp dangerous high voltage. Operating temperature range -40 ℃ to +70 ℃ fits cold workshops and hot equipment rooms, anti-vibration modular
Wewnętrzne urządzenie ochrony przeciwprzepięciowej Ethernet dla budynków biurowych, 16-portowe, do montażu w szafie rack, 100M
LS-100M Series Rack-Mount Network Signal Surge Protectors are designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. They feature a standard 19” 1U rack design, making them ideal for high-density low-speed network environments such as security monitoring rooms and small data centers. Integrated with multi-channel independent protection circuits, the products minimize mutual interference between
Urządzenie ochronne przed napięciem 40kA Maksymalny rozładowanie Typ 2 Trójfazowy SPD
Product Description This 4-pole Type 2 surge protection device is engineered for 320Vac three-phase distribution systems, mounted in LPZ0B-LPZ1 distribution cabinets. With 40kA maximum discharge capacity, it diverts heavy lightning surges and limits voltage protection level ≤ 1.5kV to prevent transient overvoltage damage on industrial controllers and building power meters. Anti-vibration modular structure fits constantly vibrating factory cabinets, with built-in thermal
