spd surge protector
"
Energia wiatrowa Energia odnawialna T2 SPD 690V 40kA 80kA Ochrona przemysłowa przed wysokim napięciem
LPM 40-760/4/LPM 50-760/4 is a T2 level power surge protector specifically designed for wind power generation systems. It is engineered to withstand the high-voltage requirements of wind power systems (690Vac nominal voltage), providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product Features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Equipped with
3 fazy Całokształtowy urządzenie ochrony przed przeciążeniem 220V 40kA 50KA 80kA 100KA DIN Rail
LPM 40-385/4 Series is a T2 level power surge protector designed for three-phase power supply systems. It is specifically tailored for industrial and commercial power systems, providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Equipped with indication windows and remote signaling contacts ●
Wewnętrzne urządzenie ochrony przeciwprzepięciowej Ethernet dla budynków biurowych, 16-portowe, do montażu w szafie rack, 100M
LS-100M Series Rack-Mount Network Signal Surge Protectors are designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. They feature a standard 19” 1U rack design, making them ideal for high-density low-speed network environments such as security monitoring rooms and small data centers. Integrated with multi-channel independent protection circuits, the products minimize mutual interference between
Urządzenie przeciwprzepięciowe typu 2, 3 fazy, 220V, 385V, 40kA, 80kA do rozdzielnicy elektrycznej
About this item 1.【385V AC High-Capacity Surge Protection】 Provides reliable protection against power surges and lightning-induced over-voltages in standard AC electrical systems. Features a 385V AC operating voltage and a 80 kA discharge capacity to safeguard connected equipment2.【4P(3+NPE) Configuration for Complete Three-Phase Safety】 The 3P+N design provides independent protection for both the live and neutral conductors in a three-phase system. This comprehensive
Zewnętrzne oświetlenie LED Spd 220V 5kA 10kA AC DC Urządzenie ochrony przed przesileniem IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
Ex Sygnał zabezpieczający SPD 24Vdc IP67 10kV Ochrona petrochemiczna obszarów niebezpiecznych
LS-Ex/24 Explosion-Proof Signal Lightning Arrester is designed for communication signal line equipment in intrinsically safe areas of natural gas, gas stations, petroleum, and petrochemical systems, such as sensors and transmitters. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides reliable surge protection in hazardous environments. Featuring a SUS 304 stainless steel housing with epoxy resin potting, the product offers IP67
Urządzenie ochrony przeciwprzepięciowej 2-przewodowe do sygnałów SPD 5kA 10kV montaż na szynie DIN
LS-CS Series 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.Featuring an integrated module structure, the product supports 35mm DIN Rail mounting with
Przeciw-wybuchowe komponenty SPD 24Vdc 250mA IP67 10kV dla stref iskrobezpiecznych
Product Features ● Sus 304 stainless steel housing. ● Protection Level IP67. ● Standard threaded interface mounting. ● Series connection, low residual voltage. ● Suitable for installation in LPZ2-3 and subsequent lightning protection zones, as lightning protectors for communication signal line equipment in intrinsically safe areas of natural gas, gas stations, petroleum, and petrochemical systems, such as sensors and transmitters. Applications Suitable for installation in
Zewnętrzny T2 T3 Urządzenie Ochrony Przeciwprzepięciowej Lampa Uliczna LED SPD 220V 5kA 10kA AC DC IP67
Product Features ● Single-port full-mode surge protection: Safeguards all line paths (L-N, L-E, N-E) against transient overvoltages. ● Ultra-compact & tool-free installation: Miniature dimensions (42mm×30mm×23mm) enable quick parallel mounting at equipment front ends. ● IP67 environmental protection: Dust-tight and waterproof enclosure ensures stable performance in harsh outdoor conditions. ● LPZ 2-3 zone compatibility: Designed for installation in LPZ 2-3 and subsequent
