spd surge protector
"
Стенный монтаж Ethernet защитник от перенапряжений 8 порта 100M Домашний офис
LS-100M-8/LS-100M/POE-8 is an 8-port 100M network signal surge protector designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It features a compact flat/wall mounting design, making it ideal for small businesses, retail stores, and home offices. Integrated with 8-channel independent protection circuits, the product minimizes mutual interference between ports. The unique anti-interference wiring
Home Office Ethernet Surge Protector 100M RJ45 Устройство для защиты от перенапряжений Cat5 4kV
LS-100M/LS-100M/POE is a reliable RJ45 network signal surge protector designed for 100 BASE-T computer network information systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides targeted surge protection for low-speed Ethernet networks, ensuring stable data transmission in industrial, commercial, and residential environments. Featuring a metal body with strong anti-interference ability, the product minimizes signal loss and
Сигнал Гигабитный защитник от перенапряжения Ethernet 1000M 24V POE Rack Type 1G Сетевая связь
About this item ● 1000M Ethernet & 24V POE Compatibility: Supports 10/100/1000Mbps full-speed network transmission (no signal attenuation) and 24V POE power supply, perfectly matching IP cameras, wireless APs, and other POE-powered devices. ● Reliable Surge Protection Performance: Nominal discharge current 10kA (8/20μs), maximum discharge current 20kA (8/20μs), residual voltage ≤1.8kV — effectively shields network equipment from lightning, power surges, and transient
Устройство для защиты наружного промышленного освещения от перенапряжения с светодиодным светодиодом 220V 5kA 10kA IP67
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
Сетевой защитник от электрических перенапряжений SPD 48V 60V 5kA 10kA SPD типа 2 3
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Промышленный защитник от перенапряжений для всего дома 40A 15μH DIN Rail SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
Коробка защиты от молнии с переменным током 3 фазы Защита от перенапряжения для всего дома T2 SPD 220V 20kA 40kA 80KA
LPX-40C is a dedicated three-phase AC surge protection device engineered to shield three-phase power systems from transient overvoltages triggered by lightning strikes and grid fluctuations, delivering all-round protection for critical power infrastructure. Benefits Industrial-Grade Stability: Built with optional mode protection and rugged PCB design, delivering consistent, interference-free performance in demanding industrial environments. Precise Surge Counting: Integrated
Сигнал защитника от перенапряжения для всего дома SPD 5V 12V 24V 48V 2 Wire Line GND PLC Analog Control
LS-CSE Series 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN
Защита от молнии, трехфазные сетевые устройства защиты от перенапряжения для всего дома, 220 В, 20 кА, 40 кА, T2 SPD
LPX-40C is a three-phase AC power lightning protection box, specifically designed for three-phase power supply systems to provide comprehensive surge protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Benefits Industrial-Grade Stability: Features optional mode protection and a reliable PCB design for stable, interference-resistant performance in harsh industrial environments. Precise Surge Counting: Built-in lightning stroke
