surge protection device
"
Наружное светодиодное освещение Spd 220V 5kA 10kA AC DC Устройство защиты от перенапряжения IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
Устройство защиты от перенапряжений низкого напряжения SPD, устройство подавления перенапряжений на DIN-рейку, 220 В, 10 кА, 25 кА
SLV-10S/SLV-20S is a compact ultra-low residual voltage surge protection device designed for single-phase power supply systems, ideal for fine lightning protection in LPZ 1-2 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths.Equipped with LED status indication (green: normal; red: failed) and open-circuit
Устройство защиты от перенапряжений конечного уровня SPD 12VDC 2kA 3kA T2 T3 для чувствительной электроники
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
Устройство защиты от перенапряжения | Трехфазный разрядник для защиты от перенапряжений с высоким постоянным напряжением 440 В переменного тока
Product Description Type 2 surge protective device exclusively designed for 440Vac high-voltage three-phase distribution systems, installed in heavy-duty industrial control cabinets and large commercial secondary panels within LPZ0B-LPZ1 zones. It diverts lightning and grid switching surges with voltage protection level ≤ 2.0kV to safeguard large inverters and power control cabinets. 4-pole full L1/L2/L3/N-E circuit protection with 40kA maximum discharge capacity handles
Устройство защиты от перенапряжения. Три фазные перенапряжения с дистанционными контактами сигнального контроля.
Product Description Conventional SPDs without remote contacts rely entirely on manual inspection; degraded failed modules operate undetected and leave downstream equipment unprotected. This 4-pole surge protection device integrates NC/NO switching remote contacts to send automatic switch alarm signals to automation monitoring platforms upon SPD failure, paired with front visual status window for on-site check, delivering dual local & remote monitoring. With 40kA surge
Устройство защиты от перенапряжения | Максимальный разряд 40 кА, трехфазный УЗИП типа 2
Product Description This 4-pole Type 2 surge protection device is engineered for 320Vac three-phase distribution systems, mounted in LPZ0B-LPZ1 distribution cabinets. With 40kA maximum discharge capacity, it diverts heavy lightning surges and limits voltage protection level ≤ 1.5kV to prevent transient overvoltage damage on industrial controllers and building power meters. Anti-vibration modular structure fits constantly vibrating factory cabinets, with built-in thermal
Устройство для защиты от перенапряжений. Низкое содержание Трехфазный SPD для безнадзорных помещений электротехники.
Product Description Conventional surge protection devices require regular cabinet disassembly for internal inspection, raising labor costs and production downtime losses. This 4-pole SPD implements dual status monitoring: front green/red window enables instant on-site visual checks, while passive remote contacts transmit fault alerts to central control platforms without frequent cabinet opening. Pluggable modular design accelerates faulty unit replacement without full panel
Устройство для защиты наружного промышленного освещения от перенапряжения с светодиодным светодиодом 220V 5kA 10kA IP67
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
Устройство защиты от перенапряжений T2 T3 для светодиодных уличных фонарей, 220 В, 5 кА, 10 кА, AC DC, IP67
Product Features ● Single-port full-mode surge protection: Safeguards all line paths (L-N, L-E, N-E) against transient overvoltages. ● Ultra-compact & tool-free installation: Miniature dimensions (42mm×30mm×23mm) enable quick parallel mounting at equipment front ends. ● IP67 environmental protection: Dust-tight and waterproof enclosure ensures stable performance in harsh outdoor conditions. ● LPZ 2-3 zone compatibility: Designed for installation in LPZ 2-3 and subsequent
