surge protective device
"
Защита от молнии, трехфазные сетевые устройства защиты от перенапряжения для всего дома, 220 В, 20 кА, 40 кА, T2 SPD
LPX-40C is a three-phase AC power lightning protection box, specifically designed for three-phase power supply systems to provide comprehensive surge protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Benefits Industrial-Grade Stability: Features optional mode protection and a reliable PCB design for stable, interference-resistant performance in harsh industrial environments. Precise Surge Counting: Built-in lightning stroke
Сеть SPD 5V 12V 24V 48V 2 Wire Line GND 5Vdc 10kV промышленный контроллер
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
Промышленный защитник от перенапряжений для всего дома 40A 15μH DIN Rail SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
1G Ethernet PoE-супрессор перенапряжения Cat6 4кВ для сетевых камер, дата-центров, корпоративных сетей
SX-1000M/SX-1000M/POE is a reliable RJ45 network signal surge protector designed for 1000/1000 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides targeted surge protection for 1G Ethernet networks, ensuring stable data transmission in industrial and commercial environments.Featuring an independent metal body, the product offers strong anti-interference ability, minimizing signal loss and
Домашний офис T1 T2 SPD Однофазный ограничитель перенапряжения 220В 15кА 30кА
LPM H12.5M-280/1+NPE is a T1+T2 level power surge protection device.It adopts a mixed-technology design (MOV for L-N, GDT for N-E) to provide comprehensive protection against direct and indirect lightning strikes. Featuring module pluggable and anti-vibration design, the product is easy to maintain and replace, making it suitable for industrial and commercial environments. The built-in ultra-low temperature release mechanism ensures safe operation in extreme temperatures.
Коробка защиты от молнии с переменным током 3 фазы Защита от перенапряжения для всего дома T2 SPD 220V 20kA 40kA 80KA
LPX-40C is a dedicated three-phase AC surge protection device engineered to shield three-phase power systems from transient overvoltages triggered by lightning strikes and grid fluctuations, delivering all-round protection for critical power infrastructure. Benefits Industrial-Grade Stability: Built with optional mode protection and rugged PCB design, delivering consistent, interference-free performance in demanding industrial environments. Precise Surge Counting: Integrated
Сигнал Гигабитный защитник от перенапряжения Ethernet 1000M 24V POE Rack Type 1G Сетевая связь
About this item ● 1000M Ethernet & 24V POE Compatibility: Supports 10/100/1000Mbps full-speed network transmission (no signal attenuation) and 24V POE power supply, perfectly matching IP cameras, wireless APs, and other POE-powered devices. ● Reliable Surge Protection Performance: Nominal discharge current 10kA (8/20μs), maximum discharge current 20kA (8/20μs), residual voltage ≤1.8kV — effectively shields network equipment from lightning, power surges, and transient
Защита от перенапряжения для всего дома 3 фазы 220В 30кА 65кА
This 3-phase surge protective device (SPD, Type T2) is designed for installation in the LPZ 0B+ and subsequent lightning protection zones, providing reliable surge protection for three-phase power supply systems. It features pluggable modules, built-in thermal disconnection, and industrial-grade safety certifications, ideal for both commercial and residential applications. Product features ● The module is designed to be pluggable and anti vibration. ● Built in ultra-low
100kA MODBUS RTU Регистратор грозовых перенапряжений Интеллектуальный монитор тока грозозащиты
Product features ● 4-channel switch acquisition ports: Supports dry contact/normal open input, with independent visual and buzzer alarms for each channel when triggered. ● Ultra-high precision measurement:Delivers 0.1kA resolution for accurate lightning current peak detection. ● Built for smart lightning protection monitoring systems: Optimized for intelligent grid, outdoor lightning monitoring, and industrial lightning protection scenarios. ● Diverse communication options:
