T1 T2 Whole Home Surge Protector SPD 3 Phase 220V 25kA Extreme Environment Protection
Product Summary
LPM 25V-385/4 is a high-performance T1+T2 level power surge protector. It integrates primary and secondary protection, providing comprehensive shielding against direct and indirect lightning strikes. Product features ● Independent integrated module for each pole ● Built-in ultra-low temperature ...
Product Custom Attributes
T2 Whole Home Surge Protector
,Whole Home 3 Phase SPD
,25kA Whole Home Surge Protector
Basic Properties
Trading Properties
Product Description
LPM 25V-385/4 is a high-performance T1+T2 level power surge protector. It integrates primary and secondary protection, providing comprehensive shielding against direct and indirect lightning strikes.
| Product features |
| ● Independent integrated module for each pole |
| ● Built-in ultra-low temperature release mechanism |
| ● Built-in high-energy composite zinc oxide chip |
| ● Equipped with visual windows and remote communication dry contacts |
Applications
Product Specification
| Standards | IEC 61643-11 |
| SPD type | T1,T2 |
| Models | LPM 25V-385/4 |
| Nominal operating voltage Un | 230Vac(50Hz) |
| Maximum continuous operating voltage Uc | 385Vac(50Hz) |
| Nominal discharge current (8/20μs)In | 40kA |
| Lightning discharge current (10/350μs) Iimp | 25kA |
| Voltage protection level Up | ≤1.5kV |
| Response time tA | ≤25ns |
| Transient over voltage(TOV)UT | UT=442V(120min) |
| Protection Circuit | L1,L2,L3,N-E |
Mechanical parameters
| Installation method | DIN Rail 35mm |
| Screw torque | 5N*m |
| Strip length | 12mm |
| Wiring cross-sectional area | 2.5mm²-32mm² |
| Product size | 90mmx144mmx68mm |
| Shell material and flame retardant grade | Mineral nylon PA6, V0 |
| Deterioration indication | Window red: Fail |
| Remote signaling contact type | Normally closed and normally open switching contacts |
| Remote signaling contact switching ability | 125Vac/1A,125Vdc/0.2A |
| Maximum connection capacity of remote signaling | 2.5mm² |
Installation reminder
1.Install the SPD in LPZ 0A-B or subsequent lightning protection zones to ensure effective T1+T2 protection.
2.Use wiring with cross-sectional area 2.5mm²-32mm² and tighten screws to 5N·m torque.
3.Ensure the grounding system meets requirements (ground resistance ≤4Ω) for optimal surge diversion.
4.Replace the product immediately if the visual window turns red (failure status).
5.The product supports transient overvoltage (TOV) resistance up to 442V for 120 minutes, suitable for unstable power grids.
6.Avoid using the product beyond the specified temperature (-40℃~+80℃) and humidity range.
FAQ
Q1: What is the function of the built-in ultra-low temperature release mechanism?
A1: It ensures the product operates safely in low-temperature environments (-40℃) and disconnects faulty modules to avoid hazards.
Q2: What is the transient overvoltage (TOV) resistance of the product?
A2: It can withstand a transient overvoltage of 442V for 120 minutes, suitable for unstable power grids.
Q3: How to check the product's operating status?
A3: The visual window turns red when the product fails, indicating the need for immediate replacement.
Q4: What is the response time of the product?
A4: The response time is ≤25ns, ensuring rapid diversion of surge current to protect sensitive equipment.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
