POE Ethernet Surge Protector 16 Port Rack Mount 1G Small Data Center Network Protection
Product Summary
LS-1000M Series Rack-Mount Network Signal Surge Protectors are designed for 1000 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. They feature a standard 19” 1U rack design, making them ideal for high-density network environments ...
Product Custom Attributes
POE Ethernet Surge Protector
,Ethernet Surge Protector 16 Port
,Rack Mount Poe Surge Protector
Basic Properties
Trading Properties
Product Description
LS-1000M Series Rack-Mount Network Signal Surge Protectors are designed for 1000 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. They feature a standard 19” 1U rack design, making them ideal for high-density network environments such as data centers and server rooms.
Integrated with multi-channel independent protection circuits, the products minimize mutual interference between ports. The unique anti-interference wiring design meets 1G network communication requirements, while the single-stage high-energy device parallel protection circuit delivers low residual voltage. This ensures effective surge protection without compromising network performance.
| Product Features |
|
● Standard 19”, 1u rack mount.
|
|
●Integrated multi-channel independent protection circuit, small mutual interference.
|
|
●Unique anti-interference wiring design, meet 1G network communication.
|
|
●Single-stage high-energy device parallel protection circuit design, low residual voltage.
|
|
●Cat6 type line lightning protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 1000/1000 BASE-T 802.3 computer network information systems.
|
Product Specification
|
Standards
|
IEC 61643.21
|
|||
|
Models
|
LS-1000M-16
|
LS-1000M-24
|
LS-1000M/POE-16
|
LS-1000M/POE-24
|
|
Parameter
|
||||
|
Nominal operating voltage Un
|
5Vdc
|
48Vdc
|
||
|
Maximum continuous operating voltage Uc
|
6.8Vdc
|
|
||
|
X-X Shock rating C2/C1
|
4kV/2kA
|
1kV/0.5kA
|
||
|
X-C Shock rating C2
|
4kV/2kA
|
4kV/2kA
|
||
|
X-X,X-C Shock rating B2
|
4kV(10/700μs)
|
4kV(10/700μs)
|
||
|
X-X Up@C2/C1
|
≤25V
|
≤25V
|
||
|
X-C Up@C2
|
≤500V
|
≤500V
|
||
|
X-X Up@B2
|
≤20V
|
≤15V
|
||
|
X-C Up@B2
|
≤300V
|
≤300V
|
||
|
Response time tA
|
1ns
|
1ns
|
||
|
Maximum transfer rate Vs
|
1G bit/s
|
1G bit/s
|
||
|
Load current
|
1A
|
1A
|
||
|
Number of protected ports
|
16Line
|
24Line
|
16Line
|
24Line
|
|
Protective Line
|
1-2,3-6,4-5,7-8
|
|||
|
Failure indication
|
Signal interrupted
|
|||
|
Installation mode
|
19” rack
|
|
Product dimensions
|
480mmx120mmx44mm
|
|
Shell material
|
Cold-rolled steel sheet painted black
|
|
Installation location
|
Indoor
|
|
Shell protection rating
|
IP20
|
|
Temperature range
|
-40℃…+80℃
|
|
Humidity range
|
Relative humidity≤95%
|
Notices
●Ensure the rack mounting space meets 1U (44mm) height requirement.
●For POE models, avoid exceeding the maximum continuous operating voltage (60Vdc) to prevent damage.
●Use Cat-5e or higher grade cables to ensure 1Gbit/s transmission speed.
●Properly ground the SPD to guarantee surge diversion; ground resistance ≤4Ω is recommended.
●Regularly inspect the ports for loose connections or physical damage.
●Failure is indicated by signal interruption; troubleshoot or replace the product if multiple ports fail simultaneously.
FAQ
Q1: How many ports do these rack-mount SPDs have?
A1: They are available in 16-port and 24-port options, meeting different density requirements.
Q2: Are POE and non-POE models interchangeable?
A2: No, POE models are specifically designed to handle 48Vdc POE power supply, while non-POE models are for standard network lines.
Q3: What is the housing material of the product?
A3: The housing is made of cold-rolled steel sheet with black painting, enhancing durability and heat dissipation.
Q4: Can multiple units be installed in a single rack?
A4: Yes, the 1U design allows for stacked installation in standard 19” racks, saving space.
Q5: Is the product compatible with industrial Ethernet protocols?
A5: Yes, it is compatible with most industrial Ethernet protocols, providing surge protection without affecting protocol communication.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
