signal surge protective device

This full-mode electromagnetic pulse protection device is suitable for three-phase power supply and distribution systems. Designed in accordance with IEC 61643-1, it belongs to the T1+T2 power surge protection category. It is installed in parallel at the front end of the protected AC electrical equipment, protecting your AC power supply system and equipment from damage caused by transient phenomena and high-order harmonics, both externally (such as lightning and electromagnet

LS-CS Series 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.Featuring an integrated module structure, the product supports 35mm DIN Rail mounting with

LS-100M-8/LS-100M/POE-8 is an 8-port 100M network signal surge protector designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It features a compact flat/wall mounting design, making it ideal for small businesses, retail stores, and home offices. Integrated with 8-channel independent protection circuits, the product minimizes mutual interference between ports. The unique anti-interference wiring

LPM PD Series is a T2 level power DC surge protector designed for low to medium-voltage photovoltaic (PV) power generation systems. Product FeaturesFault resistant Y-type circuit design Integrated with an arc extinguishing baffle, it prevents fire hazards caused by internal arcs, improving system safety.Double pluggable and anti-vibration designThe hot-swappable module can be replaced without power interruption, with anti-vibration structure ensuring stable operation in

About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product

Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,

About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%

Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum

Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal