lightning monitor
"
Thiết bị chống sét lan truyền | Thiết bị chống sét ba pha có tiếp điểm giám sát tín hiệu từ xa
Product Description Conventional SPDs without remote contacts rely entirely on manual inspection; degraded failed modules operate undetected and leave downstream equipment unprotected. This 4-pole surge protection device integrates NC/NO switching remote contacts to send automatic switch alarm signals to automation monitoring platforms upon SPD failure, paired with front visual status window for on-site check, delivering dual local & remote monitoring. With 40kA surge
Thiết bị bảo vệ xung điện từ 320V 50Hz 15kA Bộ bảo vệ chống sét nhà 3 pha
This full-mode electromagnetic pulse protection device is suitable for three-phase power supply and distribution systems. Designed in accordance with IEC 61643-1, it belongs to the T1+T2 power surge protection category. It is installed in parallel at the front end of the protected AC electrical equipment, protecting your AC power supply system and equipment from damage caused by transient phenomena and high-order harmonics, both externally (such as lightning and electromagnet
Đèn đường ngoài trời Led Spd Surge Protector IP67 T2 T3 220V 320V 10kA 20kA
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense for line-neutral, line-earth, and neutral-earth circuits. Boasting an ultra-compact footprint (42mm×30mm×23mm) and hassle-free installation, it is perfectly suited for space
Thiết bị chống sét lan truyền T2 T3 3 pha AC SPD 220V 20kA 40kA
Product features ● Full mode protection ● No leakage current, no afterflow ● Large flow capacity and super low residual pressure ● Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection devices in three-phase power supply systems. Product Specification Standards IEC 61643.11 SPD type T2,T3 Models SLV-40T SLV-80T Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Thiết bị chống sét lan truyền 1 pha T1 T2 cho Văn phòng 220V 15kA 30kA
LPM H12.5M-280/1+NPE is a T1+T2 level power surge protection device.It adopts a mixed-technology design (MOV for L-N, GDT for N-E) to provide comprehensive protection against direct and indirect lightning strikes. Featuring module pluggable and anti-vibration design, the product is easy to maintain and replace, making it suitable for industrial and commercial environments. The built-in ultra-low temperature release mechanism ensures safe operation in extreme temperatures.
Thiết bị SPD 1 pha TUV CE 275V 320V 385V 440V 20KA 40KA T2 Dành cho Hệ thống Nguồn điện
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Thiết bị bảo vệ sóng toàn bộ nhà 3 giai đoạn 220V 40kA 50KA 80kA 100KA DIN Rail
LPM 40-385/4 Series is a T2 level power surge protector designed for three-phase power supply systems. It is specifically tailored for industrial and commercial power systems, providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Equipped with indication windows and remote signaling contacts ●
Thiết bị chống sét lan truyền LED ngoài trời 220V 320V 10kA 20kA IP67 T2 T3 SPD
The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained
Hệ thống chống sét lan truyền toàn bộ ngôi nhà TUV CE SPD 275V 320V 385V 440V 20KA 40KA T2
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
