lightning arrester wire
"
الجهد المتزايد الموقف 3 المرحلة 220V 385V 40kA 80kA حماية المنزل من الأمواج البرقية
The LPM 80-385/4 is a Type T2 three-phase surge protective device (SPD) engineered to defend three-phase AC power distribution systems from lightning-induced surges and transient overvoltages. Built for installation in LPZ 0B+ and subsequent lightning protection zones, this unit delivers robust, reliable protection for both commercial and industrial infrastructure. Product features ● The module is designed to be pluggable and anti vibration. ● Built in ultra-low temperature
واقي من اندفاع التيار LED لإضاءة الشوارع الخارجية IP67 T2 T3 220V 320V 10kA 20kA
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense for line-neutral, line-earth, and neutral-earth circuits. Boasting an ultra-compact footprint (42mm×30mm×23mm) and hassle-free installation, it is perfectly suited for space
جهاز حماية الإشارة الكاملة من زيادة الحرارة 2 سلك خط خط 5Vdc 10kV PLC التحكم الصناعي
LS-CS5L Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN Rail
جهاز حماية الإشارة الصناعية 5 فولت 12 فولت 24 فولت 48 فولت 2 سلك خط 10 كيلو فولت تحكم PLC
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
جهاز حماية من زيادة التيار للشبكة 5 فولت 12 فولت 24 فولت 48 فولت خط سلكي 2 أرضي 5 فولت تيار مستمر 10 كيلو فولت تحكم صناعي PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
الإضاءة الخارجيّة تحت تأثير الكهرباء SPD 220V 5kA 10kA AC DC جهاز حماية من التموج IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
جهاز حماية الطاقة الكهروضوئية DC T2 SPD 100V 1000V 20KA 40KA لنظم توليد الطاقة
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
جهاز SPD من مرحلة واحدة TUV CE 275V 320V 385V 440V 20KA 40KA T2 لأنظمة إمدادات الطاقة
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
نظام حماية الطاقة الكاملة من زيادة الطاقة TUV CE SPD 275V 320V 385V 440V 20KA 40KA T2
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
