lightning arrester wire
"
超圧電圧止め器 3 段階 220V 385V 40kA 80kA ホーム 超圧電圧保護
The LPM 80-385/4 is a Type T2 three-phase surge protective device (SPD) engineered to defend three-phase AC power distribution systems from lightning-induced surges and transient overvoltages. Built for installation in LPZ 0B+ and subsequent lightning protection zones, this unit delivers robust, reliable protection for both commercial and industrial infrastructure. Product features ● The module is designed to be pluggable and anti vibration. ● Built in ultra-low temperature
屋外街路灯 LED SPD サージプロテクター IP67 T2 T3 220V 320V 10kA 20kA
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense for line-neutral, line-earth, and neutral-earth circuits. Boasting an ultra-compact footprint (42mm×30mm×23mm) and hassle-free installation, it is perfectly suited for space
全屋 信号 オーバー 保護装置 2 ワイヤー ライン ライン 5Vdc 10kV PLC 制御 産業
LS-CS5L Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN Rail
産業用信号電波保護装置 5V 12V 24V 48V 2ワイヤライン 10kV PLC制御
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
ネットワークSPD 5V 12V 24V 48V 2線式ラインGND 5Vdc 10kV産業用制御PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
屋外用LED照明 Spd 220V 5kA 10kA AC DC電圧上昇防止装置 IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
光伏電圧電源発電システム用電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
単相 TUV CE SPDデバイス 275V 320V 385V 440V 20KA 40KA T2 電源システム用
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
全室電圧保護システム TUV CE SPD 275V 320V 385V 440V 20KA 40KA T2
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
