lightning arrester wire

Product characteristics ● LCB3235 insulated down conductor is a specialized lightning protection down conductor that during operation may be subjected to impulse currents of up to 200 kA. ● LCB3235 is designed and tested to control separation distance and arcing, A semiconductive outer layer is used to minimize voltage gradients under lightning conditions ● A dedicated system that provides lightning protection and flashover protection for equipment by providing an insulation

LS-CHL Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement

LPX Series (40B-385/50B-385/80B-385/100B-385) is a customizable power surge protection box designed for various power systems.Equipped with a lightning counter, it accurately records lightning strikes for maintenance reference. The product offers free combination of open circuit breakers, SCB releases, and terminals, providing flexible configuration options. It features lightning protection indication, power supply working indication, and SPD failure indication, making

LS-CHE Series 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement

Product Features ● The high current, low residual voltage, and lightning protection modules are pluggable and have a built-in lightning status monitoring (counting) system, which can monitor and alarm the operation of the lightning protection box. ●The three-phase AC power series lightning protection box is applied to LPZ 0B-1 and subsequent partitions, installed in highly concentrated equipment rooms such as communication base station rooms, broadcasting and television

Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,

About this item ● 1000M Ethernet & 24V POE Compatibility: Supports 10/100/1000Mbps full-speed network transmission (no signal attenuation) and 24V POE power supply, perfectly matching IP cameras, wireless APs, and other POE-powered devices. ● Reliable Surge Protection Performance: Nominal discharge current 10kA (8/20μs), maximum discharge current 20kA (8/20μs), residual voltage ≤1.8kV — effectively shields network equipment from lightning, power surges, and transient

LS-CH Series 4-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides comprehensive protection for four communication signal lines simultaneously. Featuring a hot-swappable module design, the product allows for module

About this item 1. Accurate Lightning Event Recording: Supports counting of lightning-induced surge currents (compatible with 20kA-40kA discharge range), with clear digital display for real-time lightning strike statistics. 2. Easy Installation & Integration: Adopts 35mm DIN rail mounting (matches standard surge protector setups), compact structure for seamless integration into power distribution cabinets or LPS systems. 3. Durable & Reliable Performance: Shell made of flame