signal surge protective device
"
3 Phase Whole House Surge Protection Device 220V 40kA 50KA 80kA 100KA DIN Rail
LPM 40-385/4 Series is a T2 level power surge protector designed for three-phase power supply systems. It is specifically tailored for industrial and commercial power systems, providing reliable protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Product features Independent integrated module for each pole Built-in ultra-low temperature release mechanism Equipped with indication windows and remote signaling contacts
Photovoltaic Surge Protective Device DC T2 SPD 100V 1000V 20KA 40KA For Power Generation Systems
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage 2.0KV for effective lightning and overvoltage protection. Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. Compact Design
Gigabit Poe Surge Protector RJ45 10Gbps POE 5V 8V 48V 60V Communication Network Lightning Protector
Product Features Modular design, metal casing, strong anti-interference ability. DIN 35mm rail, easy for expansion. Unique anti-interference circuit design, born for 10G communication network. Parallel protection circuit design, single-stage/ high-energy/ low residual voltage. Cat-6A surge protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 10G/10G BASE-T 802.3 computer network information systems Product Specification Parameter
2 Wire Control Signal SPD 5Vdc 10kV PLC Sensor Industrial Analog Loop Protection
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Surge Protection Home T1 T2 Type Three Phase Surge Protector AC 380V SPD
About this item 50kA surge handling capacity (8/20s & 10/350s) with 1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. 25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. V0 flame-retardant PA6 shell (IP20), works in -40~+80 and 95%
Office Home Camera Ethernet Cable Surge Protector 100M Cat5 4kV
SX-100M/SX-100M/POE is a cost-effective RJ45 network signal surge protector designed for 100 BASE-T computer network information systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides reliable surge protection for low-speed Ethernet networks, ensuring stable data transmission in industrial, commercial, and residential environments.Featuring an independent metal body with strong anti-interference ability, the product minimizes
Electromagnetic Pulse Protection Device 320V 50Hz 15kA 3 Phase House Surge Protector
This full-mode electromagnetic pulse protection device is suitable for three-phase power supply and distribution systems. Designed in accordance with IEC 61643-1, it belongs to the T1+T2 power surge protection category. It is installed in parallel at the front end of the protected AC electrical equipment, protecting your AC power supply system and equipment from damage caused by transient phenomena and high-order harmonics, both externally (such as lightning and electromagnet
Home Office T1 T2 SPD Single Phase Surge Protector 220V 15kA 30kA
LPM H12.5M-280/1+NPE is a T1+T2 level power surge protection device.It adopts a mixed-technology design (MOV for L-N, GDT for N-E) to provide comprehensive protection against direct and indirect lightning strikes. Featuring module pluggable and anti-vibration design, the product is easy to maintain and replace, making it suitable for industrial and commercial environments. The built-in ultra-low temperature release mechanism ensures safe operation in extreme temperatures.
Lightning Protection Device 2 Wire Signal SPD 5kA 10kV DIN Rail Mounting
LS-CS Series 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.Featuring an integrated module structure, the product supports 35mm DIN Rail mounting with
