lightning protection box
"
Netzwerk-Schutz gegen elektrische Überspannungen SPD 48V 60V 5kA 10kA Typ 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
AC DC Überspannungsschutz für das ganze Haus Netzwerk SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
Einphasige T2 SPD-Stromüberspannungsschutz für das gesamte Haus CE TUV 2P 320V 20KA 40KA
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Drei-Phasen-Höchstspannungsschutz für das gesamte Haus CE TUV 4P 385V 20KA 40KA T2 SPD
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.8kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Dreiphasiger T2 SPD Überspannungsschutz für Zuhause CE TUV 4P 320V 20KA 40KA
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Zuhause Netzwerk Überspannungsschutz Typ 2 3 SPD 24V 32V 2kA 3kA Für AC DC Überspannungsschutzgerät
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Industrieller Überspannungsschutz-Entkoppler für das ganze Haus 40A 15μH DIN-Schienen-SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
4-Draht-Steuersignal-SPD für Netzwerke, Überspannungsableiter 10kV, 5V, 12V, 24V, 48V, SPS-Analogschleife
LS-CH Series 4-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides comprehensive protection for four communication signal lines simultaneously. Featuring a hot-swappable module design, the product allows for module
Überspannungsschutz für das gesamte Zuhause Signal SPD 5V 12V 24V 48V 2 Drahtleitung GND PLC Analogsteuerung
LS-CSE Series 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN
