lightning arrester box
"
Προστατευτικό Υπέρτασης Δικτύου SPD 48V 60V 5kA 10kA Τύπου 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Προστασία από υπερτάσεις Σπίτι T1 T2 Τύπος Τρίτης Φάσης Προστασία από υπερτάσεις AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
Τ2 Τ3 Συνδυασμένη διάταξη προστασίας από υπερτάσεις Τρίτης Φάσης 20KA 40KA SPD
Dual-function combined SPD integrating Type 2 high-current diversion and Type 3 precise voltage clamping, installed at LPZ1-LPZ2 terminal zones and coordinated with front Type 1 arresters for staged surge suppression. 25ns nanosecond phase response instantly blocks grid switching voltage spikes, two Uc variants match regional impulse withstand requirements. Vibration-resistant modular build reduces loose contact risks on production lines, standardized 5N·m torque enables
Συσκευή προστασίας από υπερτάσεις τελικού επιπέδου Spd 12Vdc 2kA 3kA T2 T3 Συσκευή ακριβείας ευαίσθητης ηλεκτρονικής
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
2 Τροφοδοτούμενο Σήμα Ελέγχου SPD 5Vdc 10kV Βιομηχανικός Αναλογικός Προστατευτικός Βρόχος
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Προστατευτική συσκευή υπερχείλισης σήματος ολόκληρου του σπιτιού 2 Σύρμα γραμμή γραμμή 5Vdc 10kV PLC Industrial Control
LS-CS5L Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN Rail
Ολόκληρο το σπίτι προστατευτικό σήμα υπερεκτάσεων SPD 5V 12V 24V 48V 2 Wire Line GND PLC Analog Control
LS-CSE Series 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines. Featuring an integrated module structure, the product supports 35mm DIN
Βιομηχανική Συσκευή Προστασίας από Υπερτάσεις Σήματος 5V 12V 24V 48V 2 Καλωδίων Γραμμή Γραμμή 10kV Έλεγχος PLC
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
Δίκτυο SPD 5V 12V 24V 48V 2 Wire Line GND 5Vdc 10kV Βιομηχανικός PLC ελέγχου
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
