signal surge protective device
"
Dc Surge Protector 300V 500V 1000V 1500V T2 PV Panel Perlindungan Energi Terbarukan
LPM PD Series is a T2 level power DC surge protector designed for low to medium-voltage photovoltaic (PV) power generation systems. Product FeaturesFault resistant Y-type circuit design Integrated with an arc extinguishing baffle, it prevents fire hazards caused by internal arcs, improving system safety.Double pluggable and anti-vibration designThe hot-swappable module can be replaced without power interruption, with anti-vibration structure ensuring stable operation in
Perangkat SPD TUV CE Fase Tunggal 275V 320V 385V 440V 20KA 40KA T2 Untuk Sistem Catu Daya
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Jaringan Perlindungan Gelombang Petir SPD 110V 160V 5kA 10kA Tipe 2 3 SPD
Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,
Pelindung Lonjakan Arus Rumah T1 T2 Tipe Tiga Fase Pelindung Lonjakan Arus AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
Peredam Lonjakan Jaringan Rumah Tipe 2 3 SPD 24V 32V 2kA 3kA Untuk Perangkat Peredam Lonjakan AC DC
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Pelindung Petir Seluruh Rumah Peredam Lonjakan Tegangan Rendah 220V 320V 20kA 40kA 80kA SPD AC
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Perlindungan Petir 3 Fase AC Seluruh Rumah Perlindung Surge 220V 20kA 40kA T2 SPD
LPX-40C is a three-phase AC power lightning protection box, specifically designed for three-phase power supply systems to provide comprehensive surge protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Benefits Industrial-Grade Stability: Features optional mode protection and a reliable PCB design for stable, interference-resistant performance in harsh industrial environments. Precise Surge Counting: Built-in lightning stroke
Perangkat Pelindung Lonjakan Jaringan SPD 5V 12V 24V 48V 2 Kabel Jalur GND 5Vdc 10kV Kontrol Industri PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
Pelindung Lonjakan Poe Ethernet 1G Cat6 4kV Kamera Jaringan Pusat Data Perusahaan
SX-1000M/SX-1000M/POE is a reliable RJ45 network signal surge protector designed for 1000/1000 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides targeted surge protection for 1G Ethernet networks, ensuring stable data transmission in industrial and commercial environments.Featuring an independent metal body, the product offers strong anti-interference ability, minimizing signal loss and
