signal surge protective device
"
Dc Aşınma Koruyucusu 300V 500V 1000V 1500V T2 PV Panel Yenilenebilir Enerji Koruması
LPM PD Series is a T2 level power DC surge protector designed for low to medium-voltage photovoltaic (PV) power generation systems. Product FeaturesFault resistant Y-type circuit design Integrated with an arc extinguishing baffle, it prevents fire hazards caused by internal arcs, improving system safety.Double pluggable and anti-vibration designThe hot-swappable module can be replaced without power interruption, with anti-vibration structure ensuring stable operation in
Tek Fazlı TUV CE SPD Cihazı 275V 320V 385V 440V 20KA 40KA T2 Güç Kaynağı Sistemleri İçin
About this item ● High Surge Protection: Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤2.2kV, effectively protects against lightning and overvoltage. ● Safe & Durable: Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use: Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Yıldırım Koruma Ağı SPD 110V 160V 5kA 10kA Tip 2 3 SPD
Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,
Surge Protection Home T1 T2 Tip Üç Fazlı Aşırı Gerilim Koruyucu AC 380V SPD
About this item ● 50kA surge handling capacity (8/20μs & 10/350μs) with ≤1.5kV protection level, shielding three-phase power systems from lightning and overvoltage. ● Full-mode protection (L1-N/L2-N/L3-N/N-E) eliminates blind spots, compatible with LPZ 0A-B lightning protection zones. ● ≤25ns fast response time, no leakage current , ensuring stable operation of sensitive equipment like solar inverters. ● V0 flame-retardant PA6 shell (IP20), works in -40℃~+80℃ and ≤95%
Ev Ağı Artış Koruyucusu Tip 2 3 SPD 24V 32V 2kA 3kA AC DC Artış Baskı cihazı için
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Tüm Ev Yıldırım Koruması Düşük Voltajlı Fırtına Baskıcısı 220V 320V 20kA 40kA 80kA AC SPD
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Yıldırımdan Koruma 3 Fazlı AC Tüm Ev Aşırı Gerilim Koruyucuları 220V 20kA 40kA T2 SPD
LPX-40C is a three-phase AC power lightning protection box, specifically designed for three-phase power supply systems to provide comprehensive surge protection against transient overvoltages caused by lightning strikes and power grid fluctuations. Benefits Industrial-Grade Stability: Features optional mode protection and a reliable PCB design for stable, interference-resistant performance in harsh industrial environments. Precise Surge Counting: Built-in lightning stroke
Ağ SPD 5V 12V 24V 48V 2 Kablo Hattı GND 5Vdc 10kV Endüstriyel Kontrol PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
1G Ethernet Poe Aşırı Gerilim Koruyucu Cat6 4kV Ağ Kamerası Veri Merkezi Kurumsal
SX-1000M/SX-1000M/POE is a reliable RJ45 network signal surge protector designed for 1000/1000 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides targeted surge protection for 1G Ethernet networks, ensuring stable data transmission in industrial and commercial environments.Featuring an independent metal body, the product offers strong anti-interference ability, minimizing signal loss and
