lightning arrester box
"
全館雷擊保護 低壓突波抑制器 220V 320V 20kA 40kA 80kA AC SPD
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
ギガビットPoEサージプロテクター RJ45 10Gbps POE 5V 8V 48V 60V 通信ネットワーク雷保護装置
Product Features ● Modular design, metal casing, strong anti-interference ability. ● DIN 35mm rail, easy for expansion. ● Unique anti-interference circuit design, born for 10G communication network. ● Parallel protection circuit design, single-stage/ high-energy/ low residual voltage. ● Cat-6A surge protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 10G/10G BASE-T 802.3 computer network information systems Product Specification Parameter
4線式制御信号SPDネットワークサージアレスタ 10kV 5V 12V 24V 48V PLCアナログループ
LS-CH Series 4-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides comprehensive protection for four communication signal lines simultaneously. Featuring a hot-swappable module design, the product allows for module
多チャンネル雷撃カウンター 9999 桁 0.5kA-100kA 電流 2 チャネル RS485 通信インターフェース
Description This system is designed for monitoring and intelligent management of surge protectors, including recorded lightning strike counts, strike duration, remote signaling data, status of pre-breakers, and operational status of lightning arresters.Features • Display lightning arrester discharge count and status of two switch signals online • Microprocessing and digital storage ensure accurate data recording, interference-free operation, and data retention during power
4P SPD 避雷器 20KA 40KA 3 相三相端子キャビネット用
3+NPE topology surge arrester built for three-phase five-wire TN-S and TT power systems, with separated phase-earth and neutral-earth discharge paths to avoid unbalanced neutral current issues seen on standard 4P SPDs. Classified as combined T2+T3 fine protection for LPZ1-LPZ2 terminal panels, carrying 20kA nominal and 40kA max surge capacity to withstand repeated lightning impulses. Vibration-proof pluggable modules fit continuously vibrating production cabinets, front
2線信号SPDネットワークサージアレスタ 5V 60V DC 5Vdc 10kV PLCセンサーフルモード
LS-W2 Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves space in
SPDインテリジェントモニター 3方向漏電電流 MODBUS RTU 雷サージ保護
Product Features● One channel NTC acquisition port: measure the surface temperature of SPD, with ultra/low temperature alarm function, threshold can be set, and independent alarm indicator can record 30 times (register reading) of alarm times and the date and time of alarm occurrence.● One lightning surge collection port: monitoring line surge current, triggering threshold of 500A, T1/T2/T3 compatible. The surge count is displayed locally for 0-9999 times, and the register
3相電波抑制器 T2 T3 20KA 40KA SPD 北部冷たいワークショップ用
Wide-temperature 3+NPE surge arrester engineered for sealed high-temp cabinets and cold northern workshops, rated up to 80℃ versus standard 70℃ SPD limits, with consistent residual voltage and surge capacity in unventilated power enclosures and hot production lines. Dedicated low-temperature thermal release prevents unnecessary tripping at -40℃ extreme cold, while uniform N-E residual voltage ≤1.5kV pairs with GMR phase low-residual technology for full three-phase coverage.
防雷装置 2 ワイヤ信号 SPD 5kA 10kV DIN 鉄道 設置
LS-CS Series 2-Wire Control Signal Lightning Arrester (Full-Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines.Featuring an integrated module structure, the product supports 35mm DIN Rail mounting with
