surge protection devices spds
"
低電圧電波防護装置 Spd DIN 鉄道マウント電波防護装置 220V 10kA 25kA
SLV-10S/SLV-20S is a compact ultra-low residual voltage surge protection device designed for single-phase power supply systems, ideal for fine lightning protection in LPZ 1-2 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths.Equipped with LED status indication (green: normal; red: failed) and open-circuit
ナイロン電波防護装置 SPDS LED SPD 220V 5kA 10kA IP67 屋外雷保護
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
最終レベル電圧保護装置 Spd 12Vdc 2kA 3kA T2 T3 敏感電子精密装置
LS-P Series is a T2+T3 level power surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it provides targeted protection for sensitive electronics and precision devices.Featuring two ports and full-mode protection, the product offers comprehensive shielding against surges in
電気機器の雷による損傷を防止する 3相 SPD
Product Description Induced lightning surges and grid switching transients often burn industrial mainboards, inverters and building low-voltage hardware. This 4-pole three-phase SPD acts as secondary protection in LPZ0B-LPZ1 cabinets, conducting and diverting surge currents within 25ns to clamp residual voltage to safe ranges and reduce overvoltage breakdown risks for downstream electronics. 40kA maximum discharge capacity withstands repeated heavy lightning impulses; anti
超電圧保護装置 実験室用精密測定器用 3相SPD
Product Description Laboratory precision measuring instruments are highly sensitive to voltage fluctuations and lightning surges; transient high voltage causes sensor calibration drift and permanent circuit damage. This 4-pole Type 2 SPD is installed on lab three-phase incoming distribution panels. The low voltage variant delivers residual voltage as low as ≤ 1.25kV with ≤ 25ns nanosecond-level response to divert surge currents and contain impulse voltage within instrument
電気自動車の充電ステーション 補助電源キャビネット
Product Description Three-phase auxiliary distribution cabinets inside EV charging stations are vulnerable to lightning induced surges and grid switching impulses, which cause charger mainboard and metering module breakdowns and downtime. This 4-pole Type 2 SPD is mounted in LPZ0B-LPZ1 secondary panels within charging stations, diverting lightning transient currents with 40kA surge capacity and clamping residual voltage within safe limits via ≤ 25ns fast response to protect
屋外用LED照明 Spd 220V 5kA 10kA AC DC電圧上昇防止装置 IP67 T2 T3
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
家全体サージサプレッサー CE TUV サージ保護デバイス 4P 275V 単相 T2 SPD
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.25kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
リモートシグナルモニタリングのコンタクト付き
Product Description Conventional SPDs without remote contacts rely entirely on manual inspection; degraded failed modules operate undetected and leave downstream equipment unprotected. This 4-pole surge protection device integrates NC/NO switching remote contacts to send automatic switch alarm signals to automation monitoring platforms upon SPD failure, paired with front visual status window for on-site check, delivering dual local & remote monitoring. With 40kA surge
