t2 dc spd
"
屋外産業照明保護装置 LED Spd 超電圧保護装置 220V 5kA 10kA IP67
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
ナイロン電波防護装置 SPDS LED SPD 220V 5kA 10kA IP67 屋外雷保護
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
全室 SPD 解離器 40A 15μH DIN 鉄道 T1 T2 調整 産業保護
LTS-40A/LTS-63A Decoupling Coil Crafted with high-quality copper wire winding and a broadband magnetic core, this decoupling device is engineered for scenarios where the cable decoupling distance between two levels of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is insufficient. It acts as a key component in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Product features ●Made
産業用家全体サージプロテクターデカップラー 40A 15μH DINレールSPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
電気電圧保護解離器 40A 15μH DIN鉄道 T1 T2 SPD 協調産業保護
LTS-40A/LTS-63A Decoupling Device is designed for scenarios where the decoupling distance between two levels of surge protectors (T1-T2, T2-T2, T2-T3) is insufficient. It plays a key role in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Crafted with high-quality QA copper wire winding and a broadband magnetic core, the product synchronizes with lightning frequency to avoid magnetic
光伏電圧電源発電システム用電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源電源
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
ネットワーク電気電圧保護装置 SPD 48V 60V 5kA 10kA 2型 3型 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
防雷ネットワーク SPD 110V 160V 5kA 10kA 2型 3型 SPD
Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,
家庭用ネットワーク電圧電圧保護具タイプ2 3 SPD 24V 32V 2kA 3kA AC DC電圧抑制装置用
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
