t2 dc spd
"
Protección de la iluminación industrial exterior LED Spd Dispositivo de protección contra sobretensiones 220V 5kA 10kA IP67
Product Features ● One port, full mode protection ● Small size and easy installation ● Protection level up to IP67 ● Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, parallel installation in the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LPF 5-320 LPF-10-320
Dispositivos de protección contra sobretensiones de nylon Spds LED SPD 220V 5kA 10kA IP67 Protección contra rayos al aire libre
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
Desacoplador SPD de toda la casa 40A 15μH DIN Rail T1 T2 Coordinación Protección industrial
LTS-40A/LTS-63A Decoupling Coil Crafted with high-quality copper wire winding and a broadband magnetic core, this decoupling device is engineered for scenarios where the cable decoupling distance between two levels of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is insufficient. It acts as a key component in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Product features ●Made
Protector contra sobretensiones de toda la casa industrial Desacoplador 40A 15μH DIN Rail SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
Desacoplador de protección contra sobretensiones eléctricas 40A 15μH DIN Rail T1 T2 SPD Coordinación Protección industrial
LTS-40A/LTS-63A Decoupling Device is designed for scenarios where the decoupling distance between two levels of surge protectors (T1-T2, T2-T2, T2-T3) is insufficient. It plays a key role in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Crafted with high-quality QA copper wire winding and a broadband magnetic core, the product synchronizes with lightning frequency to avoid magnetic
Dispositivo fotovoltaico de protección contra sobretensiones DC T2 SPD 100V 1000V 20KA 40KA para sistemas de generación de energía
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
Protector contra sobretensiones eléctricas de red SPD 48V 60V 5kA 10kA Tipo 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Red de protección contra sobretensiones de rayos SPD 110V 160V 5kA 10kA Tipo 2 3 SPD
Product description Designed for installation in LPZ 2-3 and subsequent lightning protection zones, this fine-wire lightning arrester delivers dedicated lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front of the protected equipment to clamp transient overvoltages effectively. Product features ● Full-Mode Surge Protection: Dual-port design provides comprehensive protection against all surge modes,
Protector contra sobretensiones de red doméstica Tipo 2 3 SPD 24V 32V 2kA 3kA Para el dispositivo supresor de sobretensiones AC DC
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
