Outdoor Street Light Led Spd Surge Protector IP67 T2 T3 220V 320V 10kA 20kA
Product Summary
The LPC Series is a purpose-built surge protector tailored for LED street lights and high-power outdoor electrical devices, optimized for installation in LPZ 2-3 and subsequent lightning protection zones. It employs a two-port full-mode protection architecture, delivering all-around surge defense ...
Product Custom Attributes
Street Light Led Spd
,Spd Surge Protector IP67
,T2 Lightning Arrester Device
Basic Properties
Trading Properties
Product Description
| Product Features |
● Two ports, full mode protection |
●Small size and easy installation |
●Protection level up to IP67 |
●Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, installed in series at the front end of the final level equipment of the AC/DC power supply system, widely used as lightning protectors for LED street lights, sensors, and other equipment. |
Product Specification
Standards | IEC 61643-11 | |
SPD type | T2,T3 | |
Models | LPC 5-320 | LPC-10-320 |
Electrical parameters | ||
Nominal operating voltage Un | 220Vac(50Hz) | |
Maximum continuous operating voltage Uc | 320Vac(50Hz) | |
Nominal discharge current (8/20μs)In | 5kA | 10kA |
Maximum discharge current (8/20μs) Imax | 10kA | 20kA |
Voltage protection level In@Up | ≤1.25kV | ≤1.5kV |
Load current | 10A | 10A |
Response time tA | ≤25ns | ≤25ns |
Protection Circuit | L-N,L-E,N-E | L-N,L-E,N-E |
Failure and alarm | ||
Deterioration indication | LED green: OK; Off: Fail (optional function) | |
Fixed method | φ4mmFixing lug |
Wire length | 200mm |
Wire cross-sectional area | 1.5mm² |
Product size | 42mmx30mmx23mm |
Shell material and flame retardant grade | Nylon,VO |
Installation position | Indoor and outdoor |
Degrees of protection provided by enclosure | IP67 |
Temperature range | -40℃…+80℃ |
Humidity range | Relative humidity ≤ 95% (max 40 ℃) |
Notices
1.Installation Scenario: Designed for series installation at the front end of LED street lights and high-power outdoor equipment, within LPZ 2-3 or subsequent lightning protection zones.
2.Secure Mounting: Use the included φ4mm fixing lugs for stable installation, ensuring resistance to wind and vibration in outdoor environments.
3.Wiring & Sealing: Utilize the pre-attached 200mm wires (1.5mm² cross-sectional area) for convenient wiring; ensure proper sealing of all connections to maintain IP67 protection.
4.Load Limit: Do not exceed the maximum 10A load current to prevent overheating and ensure device longevity.
5.Status Monitoring: If the optional green LED indicator is off (indicating device failure) or after severe surge impact, replace the SPD immediately to maintain continuous protection.
6.System Compatibility: This product is designed for AC 220Vac(50Hz) systems; always confirm the system voltage matches before installation.
FAQ
Q1: What is the maximum load current rating of the LPC Series?
A1: The LPC Series supports a maximum load current of 10A, making it ideal for high-power LED street lights and other outdoor equipment with moderate power requirements.
Q2: How does the LPC Series differ from the LPF Series?
A2: The LPC Series features a two-port design and 10A load current capacity, specifically engineered for high-power outdoor equipment. In contrast, the LPF Series uses a one-port design without a specified load current limit, intended for general-purpose equipment applications.
Q3: Is this product suitable for high-humidity coastal areas?
A3: Yes. Its IP67 ingress protection and corrosion-resistant nylon housing make it highly suitable for high-humidity and corrosive coastal environments.
Q4: Can this SPD be used for other outdoor equipment besides LED street lights?
A4: Absolutely. It is compatible with a wide range of high-power outdoor electronic devices, including large-scale sensors, outdoor monitoring equipment, and other industrial outdoor units.
Q5: What are the specifications of the pre-attached wires?
A5: The product comes with 200mm-long wires with a cross-sectional area of 1.5mm², designed for convenient and reliable field wiring.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
