lightning surge protection box
"
Thiết bị chống sét tín hiệu điều khiển 2 dây SPD 5Vdc 10kV Cảm biến PLC Bảo vệ vòng lặp tương tự công nghiệp
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Bộ đếm sóng sét 999999 chữ số IP67 2KA-100kA Kiểm tra Đánh sét cho nhà máy điện / trạm cơ sở
Product Features ● Wide range of counting current, capable of monitoring various lightning strike waveforms ● Built in large capacity battery, no external power supply required ● High protection level, up to IP67 ● Patented technology with reliable performance ● Using high-quality mechanical meter heads with strong anti-interference ability ● Simultaneously meet the T1 and T2 waveform counting requirements ● Suitable for counting and monitoring the lightning current and surge
Thiết bị chống sét toàn nhà điện áp thấp 220V 320V 20kA 40kA 80kA SPD AC
Description Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection in single-phase power supply systems. Features 1.Full mode protection 2. Large flow capacity and super low residual pressure 3.No leakage current, no afterflow Parameter Standard IEC 61643.11 SPD type T2,T3 Models SLV-40S SLV-80S Parameter Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
100kA Lightning Current Peak Monitor MODBUS RTU Surge Recorder For Lightning Protection System
Product features ● 4-channel switch acquisition ports: Supports dry contact/normal open monitoring, with visual and buzzer alarm for remote alert. ● High-precision surge monitoring: Delivers accurate measurement of lightning current peaks and waveform data. ● Tailored for intelligent lightning protection monitoring systems: Optimized for smart grid and outdoor lightning monitoring scenarios. ● Multi-communication mode support: Compatible with Ethernet, LoRa, 4G, and other
Bảo vệ sét T1 T2 SPD 3 pha bảo vệ điện gia tăng 220V 25kA 40kA 80kA
LPM 25B-385/4/LPM 50B-385/4 is a T1+T2 level power surge protector. It integrates primary (T1) and secondary (T2) protection, providing comprehensive shielding against direct and indirect lightning strikes. Product features • Integrated module design:Integrated module design enables hot-swappable replacement, accurate surge protection, and cost-effective maintenance. • Support Kevin Connection:Featuring an integrated module design, ensuring accurate current measurement and
Màn hình đỉnh dòng sét 100kA MODBUS RTU Hệ thống chống sét Thiết bị ghi xung sét
Product features ● 4 switch acquisition ports. ●High accuracy. ●Designed for intelligent lightning protection monitoring system. ●Support Ethernet, Lora, 4G and other communication modes ●DC 12V and AC 220V power supply optional. ●Up to 10 Switch alarm records (channel number, alarm date and time) . ●Support for standard 35mm DIN-RAIL and wall mounting, 1 inch OLED display, Standard MODBUS-RTU protocol. ●1 RS485 communication serial port for branch computer communication
Signal Lightning Arrester 5V 6V DC 2 Wire Line Line Gigabit Ethernet Surge Protector
LS-CHL Series 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement
Thiết bị chống sét lan truyền 1 pha T1 T2 cho Văn phòng 220V 15kA 30kA
LPM H12.5M-280/1+NPE is a T1+T2 level power surge protection device.It adopts a mixed-technology design (MOV for L-N, GDT for N-E) to provide comprehensive protection against direct and indirect lightning strikes. Featuring module pluggable and anti-vibration design, the product is easy to maintain and replace, making it suitable for industrial and commercial environments. The built-in ultra-low temperature release mechanism ensures safe operation in extreme temperatures.
Signal Gigabit Ethernet Surge Protector 1000M 24V POE Rack Type 1G Truyền thông mạng
About this item ● 1000M Ethernet & 24V POE Compatibility: Supports 10/100/1000Mbps full-speed network transmission (no signal attenuation) and 24V POE power supply, perfectly matching IP cameras, wireless APs, and other POE-powered devices. ● Reliable Surge Protection Performance: Nominal discharge current 10kA (8/20μs), maximum discharge current 20kA (8/20μs), residual voltage ≤1.8kV — effectively shields network equipment from lightning, power surges, and transient
