lightning surge protection box
"
Hệ thống bảo vệ sóng điện SPD 48V 60V 5kA 10kA loại 2 3 SPD
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, this SPD is designed to provide lightning protection for end-level equipment in both AC and DC power systems. It is typically installed in series at the front end of the protected equipment, acting as a fine lightning arrester. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models
Đơn pha T2 SPD Toàn nhà bảo vệ điện điện CE TUV 2P 320V 20KA 40KA
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Bộ bảo vệ sóng 3 giai đoạn toàn bộ nhà CE TUV 4P 385V 20KA 40KA T2 SPD
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.8kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Ba giai đoạn T2 SPD Home Surge Protector CE TUV 4P 320V 20KA 40KA
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
Home Network Surge Protector Type 2 3 SPD 24V 32V 2kA 3kA Đối với thiết bị ức chế sóng AC DC
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ●Two ports, full mode protection ●Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P24 Nominal operating voltage Un 24Vdc Maximum
Network Lan Cable Surge Protector RJ45 10G SPD 5V 60V Thiết bị bảo vệ tia sét tín hiệu
LS-10G/LS-10G/POE is a high-speed RJ45 network signal surge protector designed for 10G/10G BASE-T 802.3 computer network information systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It provides comprehensive protection against surges in network signal lines, ensuring stable data transmission even in harsh electromagnetic environments.Featuring a modular design with a metal casing, the product offers strong anti-interference ability,
Thiết bị chống sét lan truyền mạng SPD 5V 12V 24V 48V 2 dây nối đất GND 5Vdc 10kV Điều khiển công nghiệp PLC
LS-W2E Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Ground Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-ground mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product
Thiết bị chống sét lan truyền toàn bộ ngôi nhà AC DC Mạng SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
Công nghiệp Toàn bộ nhà bảo vệ điện giật giải ly 40A 15μH DIN Rail SPD T1 T2
LTS-40A/LTS-63A Decoupling Coil Crafted with high-purity oxygen-free copper wire winding and a broadband magnetic core, this decoupling device is purpose-built for scenarios where the cable decoupling distance between two tiers of surge protection devices (SPDs, e.g., T1-T2, T2-T3, T2-T1) is inadequate. It serves as a critical component in energy coordination between SPDs, safeguarding downstream SPDs from lightning-induced current damage and minimizing residual voltage
