surge protection spd
"
Pelindung Lonjakan Arus Seluruh Rumah AC DC Jaringan SPD 12V 24V 48V 110V 220V 2kA 3kA 5kA 10kA T2
Product description Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, used for lightning protection of final level equipment in AC and DC power systems, and a fine lightning arrester installed in series at the front level of the equipment. Product features ● Two ports, full mode protection ● Small size and easy installation Product Specification Standards IEC 61643-11 SPD type T2,T3 Models LS-P12 LS-P24 LS-P48 LS-P110 LS-P220 Nominal operating
Wall Mount Ethernet Surge Protector 8 Port 100M Home Office Perlindungan Bisnis Kecil
LS-100M-8/LS-100M/POE-8 is an 8-port 100M network signal surge protector designed for 100 BASE-T 802.3 computer network systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It features a compact flat/wall mounting design, making it ideal for small businesses, retail stores, and home offices. Integrated with 8-channel independent protection circuits, the product minimizes mutual interference between ports. The unique anti-interference wiring
Dekopler Pelindung Lonjakan Listrik 40A 15μH Rel DIN T1 T2 SPD Koordinasi Perlindungan Industri
LTS-40A/LTS-63A Decoupling Device is designed for scenarios where the decoupling distance between two levels of surge protectors (T1-T2, T2-T2, T2-T3) is insufficient. It plays a key role in energy coordination between SPDs, preventing subsequent SPDs from damage caused by lightning current and reducing residual voltage. Crafted with high-quality QA copper wire winding and a broadband magnetic core, the product synchronizes with lightning frequency to avoid magnetic
Perangkat Pelindung Lonjakan Arus Seluruh Rumah 220V 10kA 25kA Tegangan Sisa Rendah
SLV-10S/SLV-20S is a compact ultra-low residual voltage surge protector designed for single-phase power supply systems, ideal for fine lightning protection in LPZ 1-2 and subsequent lightning protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths.With nominal discharge current of 10kA (SLV-10S) and 20kA (SLV-20S), this SPD efficiently
T1 T2 Seluruh Rumah Surge Protector SPD 3 Phase 220V 25kA Perlindungan Lingkungan Ekstrim
LPM 25V-385/4 is a high-performance T1+T2 level power surge protector. It integrates primary and secondary protection, providing comprehensive shielding against direct and indirect lightning strikes. Product features ● Independent integrated module for each pole ● Built-in ultra-low temperature release mechanism ● Built-in high-energy composite zinc oxide chip ● Equipped with visual windows and remote communication dry contacts Applications Suitable for installation in LPZ 0A
Perangkat Pelindung Lonjakan Sinyal Kontrol 2 Kabel SPD 5Vdc 10kV Sensor PLC Perlindungan Loop Analog Industri
LS-CH Series 2-Wire Control Signal Lightning Arrester is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides full-mode fine protection for two signal lines. Featuring a plug-in module design, the product allows for easy replacement without interrupting
Pelindung Lonjakan Daya Seluruh Rumah Fase Tunggal T2 CE TUV 2P 320V 20KA 40KA
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Tiga Fase Seluruh Rumah Surge Protector CE TUV 4P 385V 20KA 40KA T2 SPD
About this item ●High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.8kV, effectively protects against lightning and overvoltage. ●Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ●Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product features 1
Tiga Fase T2 SPD Home Surge Protector CE TUV 4P 320V 20KA 40KA
About this item ● High Surge Protection:Nominal discharge current 20kA, max. 40kA (8/20μs), residual voltage ≤1.5kV, effectively protects against lightning and overvoltage. ● Safe & Durable:Modular pluggable design with anti-vibration, V0 flame-retardant shell and built-in temperature release for long service life. ● Easy to Use:Standard 35mm DIN rail mounting, supports 2.5-25mm² wiring, with visual status window and remote signaling for convenient monitoring. Product
