surge protection spd
"
Устройство защиты от перенапряжений T2 T3, 3 фазы, переменный ток, 220 В, 20 кА, 40 кА
Product features ● Full mode protection ● No leakage current, no afterflow ● Large flow capacity and super low residual pressure ● Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection devices in three-phase power supply systems. Product Specification Standards IEC 61643.11 SPD type T2,T3 Models SLV-40T SLV-80T Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Найлоновые устройства защиты от перенапряжения Spds LED SPD 220V 5kA 10kA IP67 наружная защита от молнии
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
Наружное устройство защиты от перенапряжения под воздействием светодиодов 220V 320V 10kA 20kA IP67 T2 T3 SPD
The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained
Устройство защиты от перенапряжения | Трехфазный SPD для шкафов вспомогательного питания зарядной станции EV
Product Description Three-phase auxiliary distribution cabinets inside EV charging stations are vulnerable to lightning induced surges and grid switching impulses, which cause charger mainboard and metering module breakdowns and downtime. This 4-pole Type 2 SPD is mounted in LPZ0B-LPZ1 secondary panels within charging stations, diverting lightning transient currents with 40kA surge capacity and clamping residual voltage within safe limits via ≤ 25ns fast response to protect
Устройство защиты от перенапряжения | Трехфазный УЗИП для ПЛК и промышленных панелей управления
Product Description 4-pole Type 2 SPD engineered for three-phase industrial automation cabinets, installed in LPZ0B-LPZ1 secondary lightning zones to protect PLCs, inverters and servo systems from lightning surges and grid switching transient overvoltage. Full L1/L2/L3-N-E circuit diverts surge currents with ≤ 25ns fast response to clamp dangerous high voltage. Operating temperature range -40 ℃ to +70 ℃ fits cold workshops and hot equipment rooms, anti-vibration modular
T2 T3 комбинированное устройство защиты от перенапряжения трехфазное 20KA 40KA SPD
Dual-function combined SPD integrating Type 2 high-current diversion and Type 3 precise voltage clamping, installed at LPZ1-LPZ2 terminal zones and coordinated with front Type 1 arresters for staged surge suppression. 25ns nanosecond phase response instantly blocks grid switching voltage spikes, two Uc variants match regional impulse withstand requirements. Vibration-resistant modular build reduces loose contact risks on production lines, standardized 5N·m torque enables
Устройство защиты от перенапряжения низкого остаточного напряжения Трехфазный 20KA 40KA 35 мм стандартный DIN Rail
This 3+NPE three-phase surge arrester is designed for LPZ1-LPZ2 terminal lightning zones with patented GMR ultra-low residual voltage technology to clamp switching and lightning transients quickly. Full L1/L2/L3-N plus independent N-E discharge circuits deliver ≤25ns L-N response time, the 320Vac variant achieves residual voltage as low as 1.0kV to mitigate calibration drift on PLCs, sensors and CNC controllers. Vibration-resistant pluggable modules integrate green/red visual
Устройство защиты от перенапряжения | Трехфазный ограничитель перенапряжения для силовых панелей коммерческих зданий
Product Description 4-pole Type 2 SPD fits three-phase power distribution systems in commercial buildings, mounted on floor secondary panels within LPZ0B-LPZ1 zones to shield lighting, air conditioning, CCTV and office electronics from induced lightning surges and grid voltage fluctuations. Multiple Uc ratings (275/320/385/440Vac) match global commercial mains standards. Pluggable modules simplify property maintenance replacement, V0 flame retardant housing mitigates cabinet
Фотоэлектрическое защитное устройство от перенапряжений DC T2 SPD 100V 1000V 20KA 40KA для систем генерации электроэнергии
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
