surge protection spd
"
T2 T3 Dispositivo di protezione contro le ondate di fulmine 3 fase AC SPD 220V 20kA 40kA
Product features ● Full mode protection ● No leakage current, no afterflow ● Large flow capacity and super low residual pressure ● Suitable for installation in LPZ 1-2 and subsequent lightning protection zones, suitable for fine lightning protection devices in three-phase power supply systems. Product Specification Standards IEC 61643.11 SPD type T2,T3 Models SLV-40T SLV-80T Nominal operating voltage Un 220Vac(50Hz) Maximum continuous operating voltage Uc 320Vac(50Hz) Nominal
Dispositivi di protezione da sovratensioni in nylon Spds LED SPD 220V 5kA 10kA IP67 Protezione da fulmini esterni
LPF Series is a specialized surge protector designed for LED street lights, sensors, and other outdoor equipment, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. It adopts a one-port full-mode protection design, providing comprehensive shielding against surges in line-neutral, line-earth, and neutral-earth paths. Featuring small size (42mmx30mmx23mm) and easy installation, the product is ideal for space-constrained outdoor applications. The
Dispositivo di protezione da sovratensioni a led esterne 220V 320V 10kA 20kA IP67 T2 T3 SPD
The LPC Series is a dedicated surge protector engineered for LED street lights and high-power outdoor electrical equipment, ideal for installation in LPZ 2-3 and subsequent lightning protection zones. It features a two-port full-mode protection architecture, delivering all-round surge shielding for line-neutral, line-earth, and neutral-earth paths.With its ultra-compact dimensions (42mm×30mm×23mm) and tool-free installation, it is perfectly suited for space-constrained
Dispositivo di protezione contro le sovratensioni.
Product Description Three-phase auxiliary distribution cabinets inside EV charging stations are vulnerable to lightning induced surges and grid switching impulses, which cause charger mainboard and metering module breakdowns and downtime. This 4-pole Type 2 SPD is mounted in LPZ0B-LPZ1 secondary panels within charging stations, diverting lightning transient currents with 40kA surge capacity and clamping residual voltage within safe limits via ≤ 25ns fast response to protect
Dispositivo di protezione contro le sovratensioni.
Product Description 4-pole Type 2 SPD engineered for three-phase industrial automation cabinets, installed in LPZ0B-LPZ1 secondary lightning zones to protect PLCs, inverters and servo systems from lightning surges and grid switching transient overvoltage. Full L1/L2/L3-N-E circuit diverts surge currents with ≤ 25ns fast response to clamp dangerous high voltage. Operating temperature range -40 ℃ to +70 ℃ fits cold workshops and hot equipment rooms, anti-vibration modular
T2 T3 Dispositivo combinato di protezione contro le sovratensioni di tre fasi 20KA 40KA SPD
Dual-function combined SPD integrating Type 2 high-current diversion and Type 3 precise voltage clamping, installed at LPZ1-LPZ2 terminal zones and coordinated with front Type 1 arresters for staged surge suppression. 25ns nanosecond phase response instantly blocks grid switching voltage spikes, two Uc variants match regional impulse withstand requirements. Vibration-resistant modular build reduces loose contact risks on production lines, standardized 5N·m torque enables
Dispositivo di protezione contro le sovratensioni da bassa tensione residua di tre fasi 20KA 40KA 35mm standard DIN Rail
This 3+NPE three-phase surge arrester is designed for LPZ1-LPZ2 terminal lightning zones with patented GMR ultra-low residual voltage technology to clamp switching and lightning transients quickly. Full L1/L2/L3-N plus independent N-E discharge circuits deliver ≤25ns L-N response time, the 320Vac variant achieves residual voltage as low as 1.0kV to mitigate calibration drift on PLCs, sensors and CNC controllers. Vibration-resistant pluggable modules integrate green/red visual
Dispositivo di protezione contro le sovratensioni.
Product Description 4-pole Type 2 SPD fits three-phase power distribution systems in commercial buildings, mounted on floor secondary panels within LPZ0B-LPZ1 zones to shield lighting, air conditioning, CCTV and office electronics from induced lightning surges and grid voltage fluctuations. Multiple Uc ratings (275/320/385/440Vac) match global commercial mains standards. Pluggable modules simplify property maintenance replacement, V0 flame retardant housing mitigates cabinet
Dispositivo fotovoltaico di protezione contro le sovratensioni DC T2 SPD 100V 1000V 20KA 40KA Per sistemi di generazione di energia
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features ● High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage ≤2.0KV for effective lightning and overvoltage protection. ● Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. ● Compact Design
