signal lightning arrester
"
Industrial Signal Surge Protection Device 5V 12V 24V 48V 2 Wire Line Line 10kV PLC Control
LS-W2L Series Ultra-Thin 2-Wire Control Signal Lightning Arrester (Line-Line Mode) is designed for communication equipment such as dedicated communication lines, telemetry signals, measurement and control signals, PLC analog control systems, and 4-20mA current loops. Suitable for installation in LPZ 2-3 and subsequent lightning protection zones, it provides line-line mode fine protection for two signal lines.Featuring an ultra-thin design (7mm thickness), the product saves
Multi-Channel Lightning Strike Counter 9999 Digits 0.5kA-100kA Current 2 Channels With RS485 Communication Interface
Description This system is designed for monitoring and intelligent management of surge protectors, including recorded lightning strike counts, strike duration, remote signaling data, status of pre-breakers, and operational status of lightning arresters.Features Display lightning arrester discharge count and status of two switch signals online Microprocessing and digital storage ensure accurate data recording, interference-free operation, and data retention during power
SPD Intelligent Monitor 3 Way Leakage Current MODBUS RTU Lightning Surge Protection
Product Features One channel NTC acquisition port: measure the surface temperature of SPD, with ultra/low temperature alarm function, threshold can be set, and independent alarm indicator can record 30 times (register reading) of alarm times and the date and time of alarm occurrence. One lightning surge collection port: monitoring line surge current, triggering threshold of 500A, T1/T2/T3 compatible. The surge count is displayed locally for 0-9999 times, and the register
4P SPD Surge Arrester 20KA 40KA 3 Phase For Three Phase Terminal Cabinets
3+NPE topology surge arrester built for three-phase five-wire TN-S and TT power systems, with separated phase-earth and neutral-earth discharge paths to avoid unbalanced neutral current issues seen on standard 4P SPDs. Classified as combined T2+T3 fine protection for LPZ1-LPZ2 terminal panels, carrying 20kA nominal and 40kA max surge capacity to withstand repeated lightning impulses. Vibration-proof pluggable modules fit continuously vibrating production cabinets, front
Surge Protection Device | Three Phase Surge Arrester For Commercial Building Power Panels
Product Description 4-pole Type 2 SPD fits three-phase power distribution systems in commercial buildings, mounted on floor secondary panels within LPZ0B-LPZ1 zones to shield lighting, air conditioning, CCTV and office electronics from induced lightning surges and grid voltage fluctuations. Multiple Uc ratings (275/320/385/440Vac) match global commercial mains standards. Pluggable modules simplify property maintenance replacement, V0 flame retardant housing mitigates cabinet
Surge Protection Device | Three Phase SPD To Prevent Lightning Damage On Electrical Equipment
Product Description Induced lightning surges and grid switching transients often burn industrial mainboards, inverters and building low-voltage hardware. This 4-pole three-phase SPD acts as secondary protection in LPZ0B-LPZ1 cabinets, conducting and diverting surge currents within 25ns to clamp residual voltage to safe ranges and reduce overvoltage breakdown risks for downstream electronics. 40kA maximum discharge capacity withstands repeated heavy lightning impulses; anti
Surge Protection Device | Three Phase Surge Arrester With Remote Signalling Monitoring Contacts
Product Description Conventional SPDs without remote contacts rely entirely on manual inspection; degraded failed modules operate undetected and leave downstream equipment unprotected. This 4-pole surge protection device integrates NC/NO switching remote contacts to send automatic switch alarm signals to automation monitoring platforms upon SPD failure, paired with front visual status window for on-site check, delivering dual local & remote monitoring. With 40kA surge
Surge Protection Device | High Continuous Voltage 440Vac Three Phase Surge Arrester
Product Description Type 2 surge protective device exclusively designed for 440Vac high-voltage three-phase distribution systems, installed in heavy-duty industrial control cabinets and large commercial secondary panels within LPZ0B-LPZ1 zones. It diverts lightning and grid switching surges with voltage protection level 2.0kV to safeguard large inverters and power control cabinets. 4-pole full L1/L2/L3/N-E circuit protection with 40kA maximum discharge capacity handles
Photovoltaic Surge Protective Device DC T2 SPD 100V 1000V 20KA 40KA For Power Generation Systems
High-performance lightning arrester designed for photovoltaic power generation systems, available in 100V, 300V, 500V, and 1000V configurations with 20KA/40KA surge handling capacity. Key Features High Surge Handling Capacity: Nominal discharge current 20KA, maximum discharge current 40KA, residual voltage 2.0KV for effective lightning and overvoltage protection. Easy Installation: 2P 36MM rail mounting compatible with circuit breaker distribution boxes. Compact Design
